I have a code that would give you $50 off along with 6month free membership! Please feel free to use the code! Up to three people can use it!!

2021.11.28 19:54 imdianne I have a code that would give you $50 off along with 6month free membership! Please feel free to use the code! Up to three people can use it!!

submitted by imdianne to ouraring [link] [comments]

2021.11.28 19:54 Possible_Abrocoma_22 All The Best Cyber Monday Home Deals

All The Best Cyber Monday Home Deals submitted by Possible_Abrocoma_22 to BriefHeadlines [link] [comments]

2021.11.28 19:54 boredboyeddie What do you do when the floor is slippery?

Hey guys the last events I went to where really awkward for me... The floor was so slippery that even gumsoles were like ice skates... So my question is what do you do when the floor is slippery?
submitted by boredboyeddie to bboy [link] [comments]

2021.11.28 19:54 crytoloover Dogelon down over 50% and Buying FLOKI INU | Price Prediction

Dogelon down over 50% and Buying FLOKI INU | Price Prediction submitted by crytoloover to coinmarketbag [link] [comments]

2021.11.28 19:54 MentalShitShow Amazon Prime using UPS fucking Surepost now. WTF?

I pay $120/year for Prime now and the assholes chose to ship BD movie UPS fucking Surepost. I just bitched about it and got a $5 credit. I'm still pissed. The whole point of paying for Prime is to get things fast. Normally it's via Amazon van directly. Now I've had 2 orders come 2nd day UPS and USPS. Then this one gets shipped fucking Surepost. Cheapest shit possible. Come the fuck on.
Then you go on Amazon and setup a support call and you have to jump through hoops to get a live person cause it starts out with the AI bullshit trying t to help you. For fuck sake.
submitted by MentalShitShow to Rants [link] [comments]

2021.11.28 19:54 Possible_Abrocoma_22 38 Of The Best Toys And Games To Buy On Cyber Monday

38 Of The Best Toys And Games To Buy On Cyber Monday submitted by Possible_Abrocoma_22 to BriefHeadlines [link] [comments]

2021.11.28 19:54 EestiMentioned [/r/SatoshiBets] Centaurify - ⚡ Launching Now on BSC

submitted by EestiMentioned to EestiMentioned [link] [comments]

2021.11.28 19:54 RageManCrypto Arbitrum is designed with the Ethereum's virtual machine for compatibility.

submitted by RageManCrypto to Dopex [link] [comments]

2021.11.28 19:54 AccordingMolasses529 I just want to post an update on Venus. She is doing fine it was a clean break and the vet didn't think she will need surgery. Ill post more in the comments, but the bill so far was nowhere as bad i thought it was going to be.

submitted by AccordingMolasses529 to pitbulls [link] [comments]

2021.11.28 19:54 AnomomonA Profesor Zarg please retire already.

Profesor Zarg please retire already. submitted by AnomomonA to Stellaris [link] [comments]

2021.11.28 19:54 Unbr3ak ¿Actividades/excursiones/lugares que visitar para dos jóvenes de 18 años?

Este año mi mejor amigo y yo tenemos ganas de irnos a algún lugar juntos a hacer algunas actividades, principalmente en contacto con la naturaleza (tipo trekking, deporte aventura, etc). No sería tipo irnos a acampar solos porque recién estamos empezando. Si no más bien guiado, aunque tampoco hace falta que sea algo super sencillo porque estamos en buena forma física. También estaría bueno que fuera algo social, aunque no es prioridad. Nos serían de gran ayuda las recomendaciones que puedan darnos. ¡Muchas gracias!
submitted by Unbr3ak to uruguay [link] [comments]

2021.11.28 19:54 DAZW_Doc Some MC Hand sprites

Some MC Hand sprites submitted by DAZW_Doc to madnesscombat [link] [comments]

2021.11.28 19:54 crytoloover ECOMI OMI Token Utility Program Analysis (Not a 1 Trillion Price Prediction Video)

ECOMI OMI Token Utility Program Analysis (Not a 1 Trillion Price Prediction Video) submitted by crytoloover to coinmarketbag [link] [comments]

2021.11.28 19:54 manu1000 Selling Onlyfans account with balance. DM me if interested

submitted by manu1000 to accountselling [link] [comments]

2021.11.28 19:54 Goranchor [Amazon] Cyber Monday Board Games Discounts (US only)

[Amazon] Cyber Monday Board Games Discounts (US only) submitted by Goranchor to Boardgamedeals [link] [comments]

2021.11.28 19:54 SandwichRising [US-WA][H] Sandwich's Keeb68 (Patron Saint Edition) - Serial Num 3 of 10 from private design run [W] Paypal

What started as a joke ended up turning into a small batch run of keyboards for some friends. I had thought about selling the leftover PCBs, but decided to wait until I had a full kit ready for you guys. Now I can finally present:
Sandwich’s Keeb68 (Patron Saint Edition) • MX Style Quick Swap (Kailh) • NKRO (N-Key Rollover) • USB-C • Stabilizers Included • Powered by QMK • South Facing LED system in place (LEDs not included, solder-in required) • ESD Protection + Auto-resetting Internal Fuse • Case (2° or 6° with removable foot), PCB, Stabilizer set, and extra requested parts included in kit
I am asking $400 for this kit. Switches and Keycaps are NOT included with this kit, however some example photos have been provided in the album to demonstrate what the keyboard can look like fully assembled.
The rundown: I designed and built a run of 10 custom keyboards from scratch, and I have 3 of them left. These 3 are the only ones planned for sale out of the set (but never say never), and there will not be another run of this Saint Gaben version/art edition (actually never). This sale is for one of these keyboards, Serial Number 3 of 10. The condition of all these keyboards I consider new and artisan made. I am the only person who has handled them, however there may be imperfections from the process of me finishing the cases and soldering/assembling the PCBs by hand. Because this is a custom design and can’t just be googled, I have tried to give as much useful information as I can think of below. Please feel free to ask questions if there is something you’re wondering that I haven’t covered!
This keyboard’s history (Serial # 3 of 10): This was the first keyboard I soldered out of the set, and I used it as my daily driver for a couple months with a 3d printed case while I ironed out the firmware for all the keyboards. The wooden case is completely new and unused, made for you. I was originally intending to keep this as a spare keyboard, but now I have the bug to design more keyboards and won’t be needing it.
The PCB: I custom designed the PCB with the goal of making a damned good keyboard that people are proud to own. I ordered my PCB design printed with a rohs-enig gold plating on all metal surfaces, and I assembled and soldered each one by hand (with lead-free solder and rohs parts). The usb port is ESD protected, and also fused to protect it further. Each PCB takes a few hours to assemble, inspect, and test. The boards run QMK firmware, and use a custom no-screw no-tool mounting system. For anyone unfamiliar with QMK, it’s great open-source firmware that allows all sorts of options (NKRO, LEDs, web tool to edit keymaps, etc) and lets you make changes over USB. If you decide to do some soldering on the PCB, care needs to be taken to not bridge any connections to the artwork.
The Case: All cases are made of pure hardwood (sapele, in this case) and are given a protective poly coat. Rubber feet pads are also attached to give them grip. I choose from available raw hardwood boards at a local shop, and then I cnc each case with my custom design at home. Afterward, I finish them all by hand. From start to finish each case takes me a full day of work to make. The base of the case is cut at a 2° angle and an attachable foot is included to bring it up to 6°. Everything is designed to assemble and fit without any tools or hardware (other than maybe a keycap/switch puller). The case has support ledges on all 4 sides for the PCB, and alignment pegs in each corner. The faceplate’s alignment pegs and the case’s corners each have neodymium magnets embedded in them to give a little resistance to separating (paperclips do not stick to the outside of the case). Even with this resistance the faceplate and case are easy to pull apart, allowing you to look inside your keyboard whenever you’d like. Other than the magnets, the entire case is solid hardwood, and the keyboard should be handled like a favorite instrument, with clean hands and away from liquids. When assembled the keyboard is durable and has a solid feel with a very slight give. Any time a plate has the PCB and switches removed it is in a fragile state, special care needs to be taken with the plate to avoid damage. All parts are serialized and are not replaceable.
Stabilizers: I only have one type to test fit, but they match the keyboard and work well so I’m including a set with each kit. I like the sound and feel of mine with a little dab of marine grease, and a little tape on the PCB.
Nonstandard Keys: 4 keys are “non-standard” sizes in the default layout. The right alt, fn, and right ctrl key are all 1U, and the right shift is 1.75U.
Keymap: The default layout can be seen here. The firmware for the keyboard is available here. I am currently working on getting the firmware merged into the main branch of QMK to make all of their webtools available.
The LED System:I know, it seems kindof redundant to have a solder-in LEDs on a quick swap keyboard, but it lets me test designs and it gives you options. All of the parts for key lighting are in place besides the LEDs themselves. If you ask, I’ll thrown in some square LEDs, I have some blue, white, or red ones. The lights have fn keys mapped to adjust brightness and turn them on and off and it’s really easy to solder in an LED to light up a single key of your choice. Or, if you’re adventurous and know exactly what you want, you can solder in LEDs to all 68 keys. Just a heads up for anyone it matters to, all the LEDs act as one, there’s not an independent LED control line for caps lock, but QMK can be user altered to make the whole system work as just a capslock led.
Shipping and Further Support: Shipping costs are included for CONUS, which also has priority. I may be able to ship elsewhere, but the shipping will be at your expense. All of the keyboard parts are serialized and cannot be replaced. I am happy to provide additional support if you run into any trouble with the keyboards, within reason.
Notes on Hardwood Keyboard Cases: As mentioned, the case is made from sapele hardwood. It is a brown wood with some gold and red in it. The brown or red aspects of the wood can be highlighted with keycaps and also in different color light, as I hope the photo album demonstrates. I tried to get many angles in different light to showcase this. Please understand that while being durable and well-suited for daily keyboard use, this is a handmade wooden item that will break or stain with abuse. Because of the artisan process of making these keyboards, each one is slightly different from the others. The photo album clearly shows the parts of this specific keyboard for sale. Every effort has been made to cut the wood in a way to relieve as much internal tension as possible, but solid hardwood can change over time (especially in excessively dry or wet environments). If the wood changes enough, a slight wobble can develop when the keyboard is sitting flat. This can be easily fixed by trimming the replaceable rubber feet pads with an xacto knife, but ideally you won’t need to worry about this.
What’s Coming Next: If everything goes well for the sale of these 3, I plan on using the proceeds towards making a larger batch of boards for everyone here on mechmarket. I’m looking at a run of 20-40 for that batch, with a new art motif and v2 PCB changes. Feel free to leave a comment here if you would like updates on the next two Patron Saint keyboards being sold over the next couple weeks to finish off the current set, or if you would like updates on the new edition’s batch release. Also, leave a note here if you are looking for a custom PCB or keyboard designer, and maybe I can help out.
Please comment before pming. I can’t see reddit chats. Paypal Goods and Services only. Thanks for taking a look!
submitted by SandwichRising to mechmarket [link] [comments]

2021.11.28 19:54 crytoloover Rarible IS ON THE CLIMB TODAY! TOP GAINER ON COINBASE!

submitted by crytoloover to coinmarketbag [link] [comments]

2021.11.28 19:54 jerbaws How do I fix my muted mic on my xbox? I have set audio to open mic and all audio boxes ticked: still have the mute symbol next to my name

I can't hear anyone in game and they can't hear me, help.
submitted by jerbaws to halo [link] [comments]

2021.11.28 19:54 Ram_1979 What's your history of online trading?

When did you start trading online, what brokers/ apps did you use, how does it compare to trading online today?
I'm a bit late to the game and out of interest I'm curious as to how far back you can go allowing you to trade with ease online via an app or website.
What year was the biggest change is ease of usage where you could literally click a button or two to place a trade or exit a trade.
I know some of these apps go back to 2013 but I'd imagine it went a good few years back from then also.
Back in the 90s I was somewhat interested in trafing stocks particularly penny stocks, I'd read the numbers in the newspaper but I had little idea of how to get started, I'd assume you'd have to contact a broker in London who'd just laugh at the tiny amounts of money you had to trade with, I'd assume you would need a minimum amount to open an account and they could charge high fees as compared to today so I never pursued it.
submitted by Ram_1979 to Daytrading [link] [comments]

2021.11.28 19:54 Vlookup-hookup 3D Zoetrope 3D Printed for Halloween

3D Zoetrope 3D Printed for Halloween submitted by Vlookup-hookup to halloween [link] [comments]

2021.11.28 19:54 Possible_Abrocoma_22 All The Best Cyber Monday Deals For Parents

All The Best Cyber Monday Deals For Parents submitted by Possible_Abrocoma_22 to BriefHeadlines [link] [comments]

2021.11.28 19:54 crytoloover $200 Per Day From ELROND Maiar DEX Must WATCH

submitted by crytoloover to coinmarketbag [link] [comments]

2021.11.28 19:54 Drawn_to_Heal Anyone have an extra tie they’re willing to part with?

Just finished my first play through(was an Xbox hold out), quite obsessed…already planning my Hobo Cop costume for next year and the ties are all sold out.
Willing to pay dollars or make art for anyone willing to trade.
submitted by Drawn_to_Heal to DiscoElysium [link] [comments]

2021.11.28 19:54 queenlivia Character bio: Damian Black, a LI from the upcoming story ‘Playing The Victim’ 🔥😍

Character bio: Damian Black, a LI from the upcoming story ‘Playing The Victim’ 🔥😍 submitted by queenlivia to novelsgame [link] [comments]

2021.11.28 19:54 Possible_Abrocoma_22 40 Before And After Pictures Of Things Used Beyond Their Breaking Point

40 Before And After Pictures Of Things Used Beyond Their Breaking Point submitted by Possible_Abrocoma_22 to BriefHeadlines [link] [comments]